Skip to main content ↑ ↓
Topic: Door step (Read 330 times) previous topic - next topic

Door step

Hey Friends
I found my door step out when going down the road. And now it's not coming up. I checked the magnet switch and it's working. Any ideas?
1999 320 36'
James and Suzi
1999 U320  36, Cummins M11
Build 5544  Motorcade #17268
Ronan, Montana
2020 Jeep gladiator

Re: Door step

Reply #1 –
You need to check the air regulator and the shuttle valve ( Noregen) that controls the step. These 2 are located bolted to the backside of the step well. Check all the related air lines for damage. Report back what you find.

Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: Door step

Reply #3 –

James, I used these from Amazon, it's been in for over 2 years with no issues.  At this price, you can keep a spare on hand too.

Amazon.com: TAILONZ PNEUMATIC 1/4"NPT Solenoid Valve 12V/24V/110V Single...

As an Amazon Associate Foretravel Owner's Forum earns from qualifying purchases.
Mark & Bev
2001 U295 36'
Cummins ISC 8.3 350HP
Build #5802
Jeep Wrangler Toad

Re: Door step

Reply #4 –
So after doing a visual look at the airlines, solenoids, and electrical wires everything seems to be ok. Including air pressure on the two gauges.
Do you know where the wires run to a controller some where?

Thanks. James
James and Suzi
1999 U320  36, Cummins M11
Build 5544  Motorcade #17268
Ronan, Montana
2020 Jeep gladiator
 

Re: Door step

Reply #5 –
Quote from: Gold Nugget finder –
Do you know where the wires run to a controller some where?

Well it ain't a fancy thing it is just an old time relay. It is hid behind the removable kick panel that is just in front of the passengers seat.  Seems like on a '99 coach that relay is on the left hand side of the panel and is about 4 from the bottom.

Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."